Package com.oracle.bmc.vnmonitoring.model

Class IPSecConnectionTunnel.Builder

java.lang.Object

com.oracle.bmc.vnmonitoring.model.IPSecConnectionTunnel.Builder

Enclosing class:

IPSecConnectionTunnel

public static class IPSecConnectionTunnel.Builder
extends Object

Constructor Summary

Constructors

Constructor	Description
Builder()

Method Summary

Modifier and Type	Method	Description
IPSecConnectionTunnel.Builder	associatedVirtualCircuits(List<String> associatedVirtualCircuits)	The list of virtual circuit OCIDs over which your network can reach this tunnel.
IPSecConnectionTunnel.Builder	bgpSessionInfo(BgpSessionInfo bgpSessionInfo)
IPSecConnectionTunnel	build()
IPSecConnectionTunnel.Builder	compartmentId(String compartmentId)	The OCID of the compartment containing the tunnel.
IPSecConnectionTunnel.Builder	copy(IPSecConnectionTunnel model)
IPSecConnectionTunnel.Builder	cpeIp(String cpeIp)	The IP address of the CPE device’s VPN headend.
IPSecConnectionTunnel.Builder	displayName(String displayName)	A user-friendly name.
IPSecConnectionTunnel.Builder	dpdMode(IPSecConnectionTunnel.DpdMode dpdMode)	Dead peer detection (DPD) mode set on the Oracle side of the connection.
IPSecConnectionTunnel.Builder	dpdTimeoutInSec(Integer dpdTimeoutInSec)	DPD timeout in seconds.
IPSecConnectionTunnel.Builder	encryptionDomainConfig(EncryptionDomainConfig encryptionDomainConfig)
IPSecConnectionTunnel.Builder	id(String id)	The OCID of the tunnel.
IPSecConnectionTunnel.Builder	ikeVersion(IPSecConnectionTunnel.IkeVersion ikeVersion)	Internet Key Exchange protocol version.
IPSecConnectionTunnel.Builder	lifecycleState(IPSecConnectionTunnel.LifecycleState lifecycleState)	The tunnel’s lifecycle state.
IPSecConnectionTunnel.Builder	natTranslationEnabled(IPSecConnectionTunnel.NatTranslationEnabled natTranslationEnabled)	By default (the AUTO setting), IKE sends packets with a source and destination port set to 500, and when it detects that the port used to forward packets has changed (most likely because a NAT device is between the CPE device and the Oracle VPN headend) it will try to negotiate the use of NAT-T.
IPSecConnectionTunnel.Builder	oracleCanInitiate(IPSecConnectionTunnel.OracleCanInitiate oracleCanInitiate)	Indicates whether Oracle can only respond to a request to start an IPSec tunnel from the CPE device, or both respond to and initiate requests.
IPSecConnectionTunnel.Builder	phaseOneDetails(TunnelPhaseOneDetails phaseOneDetails)
IPSecConnectionTunnel.Builder	phaseTwoDetails(TunnelPhaseTwoDetails phaseTwoDetails)
IPSecConnectionTunnel.Builder	routing(IPSecConnectionTunnel.Routing routing)	The type of routing used for this tunnel (BGP dynamic routing, static routing, or policy-based routing).
IPSecConnectionTunnel.Builder	status(IPSecConnectionTunnel.Status status)	The status of the tunnel based on IPSec protocol characteristics.
IPSecConnectionTunnel.Builder	timeCreated(Date timeCreated)	The date and time the IPSec tunnel was created, in the format defined by RFC3339.
IPSecConnectionTunnel.Builder	timeStatusUpdated(Date timeStatusUpdated)	When the status of the IPSec tunnel last changed, in the format defined by RFC3339.
IPSecConnectionTunnel.Builder	vpnIp(String vpnIp)	The IP address of the Oracle VPN headend for the connection.

Methods inherited from class java.lang.Object

clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

Constructor Detail

Builder

public Builder()

Method Detail

compartmentId

public IPSecConnectionTunnel.Builder compartmentId(String compartmentId)

The OCID of the compartment containing the tunnel.

Parameters:

compartmentId - the value to set

Returns:

this builder

id

public IPSecConnectionTunnel.Builder id(String id)

The OCID of the tunnel.

Parameters:

id - the value to set

Returns:

this builder

vpnIp

public IPSecConnectionTunnel.Builder vpnIp(String vpnIp)

The IP address of the Oracle VPN headend for the connection.

Example: 203.0.113.21

Parameters:

vpnIp - the value to set

Returns:

this builder

cpeIp

public IPSecConnectionTunnel.Builder cpeIp(String cpeIp)

The IP address of the CPE device’s VPN headend.

Example: 203.0.113.22

Parameters:

cpeIp - the value to set

Returns:

this builder

status

public IPSecConnectionTunnel.Builder status(IPSecConnectionTunnel.Status status)

The status of the tunnel based on IPSec protocol characteristics.

Parameters:

status - the value to set

Returns:

this builder

ikeVersion

public IPSecConnectionTunnel.Builder ikeVersion(IPSecConnectionTunnel.IkeVersion ikeVersion)

Internet Key Exchange protocol version.

Parameters:

ikeVersion - the value to set

Returns:

this builder

lifecycleState

public IPSecConnectionTunnel.Builder lifecycleState(IPSecConnectionTunnel.LifecycleState lifecycleState)

The tunnel’s lifecycle state.

Parameters:

lifecycleState - the value to set

Returns:

this builder

displayName

public IPSecConnectionTunnel.Builder displayName(String displayName)

A user-friendly name.

Does not have to be unique, and it’s changeable. Avoid entering confidential information.

Parameters:

displayName - the value to set

Returns:

this builder

bgpSessionInfo

public IPSecConnectionTunnel.Builder bgpSessionInfo(BgpSessionInfo bgpSessionInfo)

encryptionDomainConfig

public IPSecConnectionTunnel.Builder encryptionDomainConfig(EncryptionDomainConfig encryptionDomainConfig)

routing

public IPSecConnectionTunnel.Builder routing(IPSecConnectionTunnel.Routing routing)

The type of routing used for this tunnel (BGP dynamic routing, static routing, or policy-based routing).

Parameters:

routing - the value to set

Returns:

this builder

timeCreated

public IPSecConnectionTunnel.Builder timeCreated(Date timeCreated)

The date and time the IPSec tunnel was created, in the format defined by RFC3339.

Example: 2016-08-25T21:10:29.600Z

Parameters:

timeCreated - the value to set

Returns:

this builder

timeStatusUpdated

public IPSecConnectionTunnel.Builder timeStatusUpdated(Date timeStatusUpdated)

When the status of the IPSec tunnel last changed, in the format defined by RFC3339.

Example: 2016-08-25T21:10:29.600Z

Parameters:

timeStatusUpdated - the value to set

Returns:

this builder

oracleCanInitiate

public IPSecConnectionTunnel.Builder oracleCanInitiate(IPSecConnectionTunnel.OracleCanInitiate oracleCanInitiate)

Indicates whether Oracle can only respond to a request to start an IPSec tunnel from the CPE device, or both respond to and initiate requests.

Parameters:

oracleCanInitiate - the value to set

Returns:

this builder

natTranslationEnabled

public IPSecConnectionTunnel.Builder natTranslationEnabled(IPSecConnectionTunnel.NatTranslationEnabled natTranslationEnabled)

By default (the AUTO setting), IKE sends packets with a source and destination port set to 500, and when it detects that the port used to forward packets has changed (most likely because a NAT device is between the CPE device and the Oracle VPN headend) it will try to negotiate the use of NAT-T.

The ENABLED option sets the IKE protocol to use port 4500 instead of 500 and forces encapsulating traffic with the ESP protocol inside UDP packets.

The DISABLED option directs IKE to completely refuse to negotiate NAT-T even if it senses there may be a NAT device in use.

.

Parameters:

natTranslationEnabled - the value to set

Returns:

this builder

dpdMode

public IPSecConnectionTunnel.Builder dpdMode(IPSecConnectionTunnel.DpdMode dpdMode)

Dead peer detection (DPD) mode set on the Oracle side of the connection.

This mode sets whether Oracle can only respond to a request from the CPE device to start DPD, or both respond to and initiate requests.

Parameters:

dpdMode - the value to set

Returns:

this builder

dpdTimeoutInSec

public IPSecConnectionTunnel.Builder dpdTimeoutInSec(Integer dpdTimeoutInSec)

DPD timeout in seconds.

Parameters:

dpdTimeoutInSec - the value to set

Returns:

this builder

phaseOneDetails

public IPSecConnectionTunnel.Builder phaseOneDetails(TunnelPhaseOneDetails phaseOneDetails)

phaseTwoDetails

public IPSecConnectionTunnel.Builder phaseTwoDetails(TunnelPhaseTwoDetails phaseTwoDetails)

associatedVirtualCircuits

public IPSecConnectionTunnel.Builder associatedVirtualCircuits(List<String> associatedVirtualCircuits)

The list of virtual circuit OCIDs over which your network can reach this tunnel.

Parameters:

associatedVirtualCircuits - the value to set

Returns:

this builder

build

public IPSecConnectionTunnel build()

copy

public IPSecConnectionTunnel.Builder copy(IPSecConnectionTunnel model)