Package com.oracle.bmc.vnmonitoring.model

Class Summary

Class	Description
AccessDeniedTrafficNode	Defines the configuration of a traffic node to which the user is denied access.
AccessDeniedTrafficNode.Builder
AddDrgRouteDistributionStatementDetails	Details used to add a route distribution statement.
AddDrgRouteDistributionStatementDetails.Builder
AddDrgRouteDistributionStatementsDetails	Details request to add statements to a route distribution.
AddDrgRouteDistributionStatementsDetails.Builder
AddDrgRouteRuleDetails	Details needed when adding a DRG route rule.
AddDrgRouteRuleDetails.Builder
AddDrgRouteRulesDetails	Details used in a request to add static routes to a DRG route table.
AddDrgRouteRulesDetails.Builder
AddedNetworkSecurityGroupSecurityRules	Note: Objects should always be created or deserialized using the AddedNetworkSecurityGroupSecurityRules.Builder.
AddedNetworkSecurityGroupSecurityRules.Builder
AddNetworkSecurityGroupSecurityRulesDetails	Note: Objects should always be created or deserialized using the AddNetworkSecurityGroupSecurityRulesDetails.Builder.
AddNetworkSecurityGroupSecurityRulesDetails.Builder
AddPublicIpPoolCapacityDetails	The information used to add capacity to an IP pool.
AddPublicIpPoolCapacityDetails.Builder
AddSecurityRuleDetails	A rule for allowing inbound (INGRESS) or outbound (EGRESS) IP packets.
AddSecurityRuleDetails.Builder
AddSubnetIpv6CidrDetails	Details used when adding an IPv6 CIDR block to a subnet.
AddSubnetIpv6CidrDetails.Builder
AddVcnCidrDetails	Details used to add a CIDR block to a VCN.
AddVcnCidrDetails.Builder
AddVcnIpv6CidrDetails	Details used when adding a ULA or private IPv6 prefix or an IPv6 GUA assigned by Oracle or a BYOIPv6 prefix.
AddVcnIpv6CidrDetails.Builder
AdhocGetPathAnalysisDetails	Defines the configuration for getting an ad-hoc path analysis.
AdhocGetPathAnalysisDetails.Builder
AllowedIkeIPSecParameters	Lists the current allowed and default IPSec tunnel parameters.
AllowedIkeIPSecParameters.Builder
AllowedPhaseOneParameters	Allowed phase one parameters.
AllowedPhaseOneParameters.Builder
AllowedPhaseTwoParameters	Allowed phase two parameters.
AllowedPhaseTwoParameters.Builder
AllowedSecurityAction	Defines the security action taken on allowed traffic.
AllowedSecurityAction.Builder
AllowedSecurityActionDetails	Defines details for the security action taken on allowed traffic.
AllowedSecurityActionDetails.Builder
AllowedSecurityConfiguration	Defines the allowed security configuration for the traffic.
BgpSessionInfo	Information for establishing a BGP session for the IPSec tunnel.
BgpSessionInfo.Builder
BulkAddVirtualCircuitPublicPrefixesDetails	Note: Objects should always be created or deserialized using the BulkAddVirtualCircuitPublicPrefixesDetails.Builder.
BulkAddVirtualCircuitPublicPrefixesDetails.Builder
BulkDeleteVirtualCircuitPublicPrefixesDetails	Note: Objects should always be created or deserialized using the BulkDeleteVirtualCircuitPublicPrefixesDetails.Builder.
BulkDeleteVirtualCircuitPublicPrefixesDetails.Builder
ByoipAllocatedRangeCollection	Results of a ListByoipAllocatedRanges operation.
ByoipAllocatedRangeCollection.Builder
ByoipAllocatedRangeSummary	A summary of CIDR block subranges that are currently allocated to an IP pool.
ByoipAllocatedRangeSummary.Builder
ByoipRange	Oracle offers the ability to Bring Your Own IP (BYOIP), importing public IP addresses or IPv6 addresses that you currently own to Oracle Cloud Infrastructure.
ByoipRange.Builder
ByoipRangeCollection	The results returned by a ListByoipRange operation.
ByoipRangeCollection.Builder
ByoipRangeSummary	Information about a ByoipRange resource.
ByoipRangeSummary.Builder
ByoipRangeVcnIpv6AllocationSummary	A summary of IPv6 CIDR block subranges currently allocated to a VCN.
ByoipRangeVcnIpv6AllocationSummary.Builder
Byoipv6CidrDetails	The list of one or more BYOIPv6 CIDR blocks for the VCN that meets the following criteria: - The CIDR must from a BYOIPv6 range.
Byoipv6CidrDetails.Builder
CaptureFilter	A capture filter contains a set of captureFilterRuleDetails governing what traffic a Vtap mirrors.
CaptureFilter.Builder
ChangeByoipRangeCompartmentDetails	The configuration details for the move operation.
ChangeByoipRangeCompartmentDetails.Builder
ChangeCaptureFilterCompartmentDetails	These configuration details are used in the move operation when changing the compartment containing a virtual test access point (VTAP) capture filter.
ChangeCaptureFilterCompartmentDetails.Builder
ChangeCpeCompartmentDetails	The configuration details for the move operation.
ChangeCpeCompartmentDetails.Builder
ChangeCrossConnectCompartmentDetails	The configuration details for the move operation.
ChangeCrossConnectCompartmentDetails.Builder
ChangeCrossConnectGroupCompartmentDetails	The configuration details for the move operation.
ChangeCrossConnectGroupCompartmentDetails.Builder
ChangeDhcpOptionsCompartmentDetails	The configuration details for the move operation.
ChangeDhcpOptionsCompartmentDetails.Builder
ChangeDrgCompartmentDetails	The configuration details for the move operation.
ChangeDrgCompartmentDetails.Builder
ChangeInternetGatewayCompartmentDetails	The configuration details for the move operation.
ChangeInternetGatewayCompartmentDetails.Builder
ChangeIPSecConnectionCompartmentDetails	The configuration details for the move operation.
ChangeIPSecConnectionCompartmentDetails.Builder
ChangeLocalPeeringGatewayCompartmentDetails	The configuration details for the move operation.
ChangeLocalPeeringGatewayCompartmentDetails.Builder
ChangeNatGatewayCompartmentDetails	The configuration details for the move operation.
ChangeNatGatewayCompartmentDetails.Builder
ChangeNetworkSecurityGroupCompartmentDetails	Note: Objects should always be created or deserialized using the ChangeNetworkSecurityGroupCompartmentDetails.Builder.
ChangeNetworkSecurityGroupCompartmentDetails.Builder
ChangePathAnalyzerTestCompartmentDetails	Details of the new compartmentId for the PathAnalyzerTest resource.
ChangePathAnalyzerTestCompartmentDetails.Builder
ChangePublicIpCompartmentDetails	The configuration details for the move operation.
ChangePublicIpCompartmentDetails.Builder
ChangePublicIpPoolCompartmentDetails	The configuration details for the move operation.
ChangePublicIpPoolCompartmentDetails.Builder
ChangeRemotePeeringConnectionCompartmentDetails	The configuration details for the move operation.
ChangeRemotePeeringConnectionCompartmentDetails.Builder
ChangeRouteTableCompartmentDetails	The configuration details for the move operation.
ChangeRouteTableCompartmentDetails.Builder
ChangeSecurityListCompartmentDetails	The configuration details for the move operation.
ChangeSecurityListCompartmentDetails.Builder
ChangeServiceGatewayCompartmentDetails	The configuration details for the move operation.
ChangeServiceGatewayCompartmentDetails.Builder
ChangeSubnetCompartmentDetails	The configuration details for the move operation.
ChangeSubnetCompartmentDetails.Builder
ChangeVcnCompartmentDetails	The configuration details for the move operation.
ChangeVcnCompartmentDetails.Builder
ChangeVirtualCircuitCompartmentDetails	The configuration details for the move operation.
ChangeVirtualCircuitCompartmentDetails.Builder
ChangeVlanCompartmentDetails	The configuration details for the move operation.
ChangeVlanCompartmentDetails.Builder
ChangeVtapCompartmentDetails	These configuration details are used in the move operation when changing the compartment containing a virtual test access point (VTAP).
ChangeVtapCompartmentDetails.Builder
CompartmentInternal	Helper definition required to perform authZ using SPLAT expressions on a Compartment Note: Objects should always be created or deserialized using the CompartmentInternal.Builder.
CompartmentInternal.Builder
ComputeInstanceEndpoint	Defines the details required for a COMPUTE_INSTANCE-type Endpoint.
ComputeInstanceEndpoint.Builder
ConnectLocalPeeringGatewaysDetails	Information about the other local peering gateway (LPG).
ConnectLocalPeeringGatewaysDetails.Builder
ConnectRemotePeeringConnectionsDetails	Information about the other remote peering connection (RPC).
ConnectRemotePeeringConnectionsDetails.Builder
Cpe	An object you create when setting up a Site-to-Site VPN between your on-premises network and VCN.
Cpe.Builder
CpeDeviceConfigAnswer	An individual answer to a CPE device question.
CpeDeviceConfigAnswer.Builder
CpeDeviceConfigQuestion	An individual question that the customer can answer about the CPE device.
CpeDeviceConfigQuestion.Builder
CpeDeviceInfo	Basic information about a particular CPE device type.
CpeDeviceInfo.Builder
CpeDeviceShapeDetail	The detailed information about a particular CPE device type.
CpeDeviceShapeDetail.Builder
CpeDeviceShapeSummary	A summary of information about a particular CPE device type.
CpeDeviceShapeSummary.Builder
CreateByoipRangeDetails	The information used to create a ByoipRange resource.
CreateByoipRangeDetails.Builder
CreateCaptureFilterDetails	A capture filter contains a set of rules governing what traffic a VTAP mirrors.
CreateCaptureFilterDetails.Builder
CreateCpeDetails	Note: Objects should always be created or deserialized using the CreateCpeDetails.Builder.
CreateCpeDetails.Builder
CreateCrossConnectDetails	Note: Objects should always be created or deserialized using the CreateCrossConnectDetails.Builder.
CreateCrossConnectDetails.Builder
CreateCrossConnectGroupDetails	Note: Objects should always be created or deserialized using the CreateCrossConnectGroupDetails.Builder.
CreateCrossConnectGroupDetails.Builder
CreateDhcpDetails	Note: Objects should always be created or deserialized using the CreateDhcpDetails.Builder.
CreateDhcpDetails.Builder
CreateDrgAttachmentDetails	Note: Objects should always be created or deserialized using the CreateDrgAttachmentDetails.Builder.
CreateDrgAttachmentDetails.Builder
CreateDrgDetails	Note: Objects should always be created or deserialized using the CreateDrgDetails.Builder.
CreateDrgDetails.Builder
CreateDrgRouteDistributionDetails	Details used to create a route distribution.
CreateDrgRouteDistributionDetails.Builder
CreateDrgRouteTableDetails	Details used in a request to create a DRG route table.
CreateDrgRouteTableDetails.Builder
CreateInternetGatewayDetails	Note: Objects should always be created or deserialized using the CreateInternetGatewayDetails.Builder.
CreateInternetGatewayDetails.Builder
CreateIPSecConnectionDetails	Note: Objects should always be created or deserialized using the CreateIPSecConnectionDetails.Builder.
CreateIPSecConnectionDetails.Builder
CreateIPSecConnectionTunnelDetails	Note: Objects should always be created or deserialized using the CreateIPSecConnectionTunnelDetails.Builder.
CreateIPSecConnectionTunnelDetails.Builder
CreateIPSecTunnelBgpSessionDetails	Note: Objects should always be created or deserialized using the CreateIPSecTunnelBgpSessionDetails.Builder.
CreateIPSecTunnelBgpSessionDetails.Builder
CreateIPSecTunnelEncryptionDomainDetails	Request to enable a multi-encryption domain policy on the IPSec tunnel.
CreateIPSecTunnelEncryptionDomainDetails.Builder
CreateIpv6Details	Note: Objects should always be created or deserialized using the CreateIpv6Details.Builder.
CreateIpv6Details.Builder
CreateLocalPeeringGatewayDetails	Note: Objects should always be created or deserialized using the CreateLocalPeeringGatewayDetails.Builder.
CreateLocalPeeringGatewayDetails.Builder
CreateMacsecKey	Defines the secret OCIDs held in Vault that represent the MACsec key.
CreateMacsecKey.Builder
CreateMacsecProperties	Properties used to configure MACsec (if capable).
CreateMacsecProperties.Builder
CreateNatGatewayDetails	Note: Objects should always be created or deserialized using the CreateNatGatewayDetails.Builder.
CreateNatGatewayDetails.Builder
CreateNetworkSecurityGroupDetails	Note: Objects should always be created or deserialized using the CreateNetworkSecurityGroupDetails.Builder.
CreateNetworkSecurityGroupDetails.Builder
CreatePathAnalyzerTestDetails	Details used to create a PathAnalyzerTest resource.
CreatePathAnalyzerTestDetails.Builder
CreatePrivateIpDetails	Note: Objects should always be created or deserialized using the CreatePrivateIpDetails.Builder.
CreatePrivateIpDetails.Builder
CreatePublicIpDetails	Note: Objects should always be created or deserialized using the CreatePublicIpDetails.Builder.
CreatePublicIpDetails.Builder
CreatePublicIpPoolDetails	The information used to create a public IP pool.
CreatePublicIpPoolDetails.Builder
CreateRemotePeeringConnectionDetails	Note: Objects should always be created or deserialized using the CreateRemotePeeringConnectionDetails.Builder.
CreateRemotePeeringConnectionDetails.Builder
CreateRouteTableDetails	Note: Objects should always be created or deserialized using the CreateRouteTableDetails.Builder.
CreateRouteTableDetails.Builder
CreateSecurityListDetails	Note: Objects should always be created or deserialized using the CreateSecurityListDetails.Builder.
CreateSecurityListDetails.Builder
CreateServiceGatewayDetails	Note: Objects should always be created or deserialized using the CreateServiceGatewayDetails.Builder.
CreateServiceGatewayDetails.Builder
CreateSubnetDetails	Note: Objects should always be created or deserialized using the CreateSubnetDetails.Builder.
CreateSubnetDetails.Builder
CreateVcnDetails	Note: Objects should always be created or deserialized using the CreateVcnDetails.Builder.
CreateVcnDetails.Builder
CreateVirtualCircuitDetails	Note: Objects should always be created or deserialized using the CreateVirtualCircuitDetails.Builder.
CreateVirtualCircuitDetails.Builder
CreateVirtualCircuitPublicPrefixDetails	Note: Objects should always be created or deserialized using the CreateVirtualCircuitPublicPrefixDetails.Builder.
CreateVirtualCircuitPublicPrefixDetails.Builder
CreateVlanDetails	Note: Objects should always be created or deserialized using the CreateVlanDetails.Builder.
CreateVlanDetails.Builder
CreateVnicDetails	Contains properties for a VNIC.
CreateVnicDetails.Builder
CreateVtapDetails	These details are included in a request to create a virtual test access point (VTAP).
CreateVtapDetails.Builder
CrossConnect	For use with Oracle Cloud Infrastructure FastConnect.
CrossConnect.Builder
CrossConnectGroup	For use with Oracle Cloud Infrastructure FastConnect.
CrossConnectGroup.Builder
CrossConnectLocation	An individual FastConnect location.
CrossConnectLocation.Builder
CrossConnectMapping	For use with Oracle Cloud Infrastructure FastConnect.
CrossConnectMapping.Builder
CrossConnectMappingDetails	For use with Oracle Cloud Infrastructure FastConnect.
CrossConnectMappingDetails.Builder
CrossConnectMappingDetailsCollection	An array of CrossConnectMappingDetails Note: Objects should always be created or deserialized using the CrossConnectMappingDetailsCollection.Builder.
CrossConnectMappingDetailsCollection.Builder
CrossConnectPortSpeedShape	An individual port speed level for cross-connects.
CrossConnectPortSpeedShape.Builder
CrossConnectStatus	The status of the cross-connect.
CrossConnectStatus.Builder
DefaultDrgRouteTables	The default DRG route table for this DRG.
DefaultDrgRouteTables.Builder
DefaultPhaseOneParameters	Default phase one parameters.
DefaultPhaseOneParameters.Builder
DefaultPhaseTwoParameters	Default phase two parameters.
DefaultPhaseTwoParameters.Builder
DeleteVirtualCircuitPublicPrefixDetails	Note: Objects should always be created or deserialized using the DeleteVirtualCircuitPublicPrefixDetails.Builder.
DeleteVirtualCircuitPublicPrefixDetails.Builder
DeniedSecurityAction	Defines the security action taken on denied traffic.
DeniedSecurityAction.Builder
DeniedSecurityActionDetails	Defines details for the security action taken on denied traffic.
DeniedSecurityActionDetails.Builder
DhcpDnsOption	DHCP option for specifying how DNS (hostname resolution) is handled in the subnets in the VCN.
DhcpDnsOption.Builder
DhcpOption	A single DHCP option according to RFC 1533.
DhcpOptions	A set of DHCP options.
DhcpOptions.Builder
DhcpSearchDomainOption	DHCP option for specifying a search domain name for DNS queries.
DhcpSearchDomainOption.Builder
DpdConfig	These configuration details are used for dead peer detection (DPD).
DpdConfig.Builder
Drg	A dynamic routing gateway (DRG) is a virtual router that provides a path for private network traffic between networks.
Drg.Builder
DrgAttachment	A DRG attachment serves as a link between a DRG and a network resource.
DrgAttachment.Builder
DrgAttachmentIdDrgRouteDistributionMatchCriteria	The criteria by which a specific attachment will import routes to the DRG.
DrgAttachmentIdDrgRouteDistributionMatchCriteria.Builder
DrgAttachmentInfo	The DrgAttachmentInfo resource contains the OCID of the DRG attachment.
DrgAttachmentInfo.Builder
DrgAttachmentMatchAllDrgRouteDistributionMatchCriteria	All routes are imported or exported.
DrgAttachmentMatchAllDrgRouteDistributionMatchCriteria.Builder
DrgAttachmentNetworkCreateDetails	Note: Objects should always be created or deserialized using the Builder.
DrgAttachmentNetworkDetails	Note: Objects should always be created or deserialized using the Builder.
DrgAttachmentNetworkUpdateDetails	Note: Objects should always be created or deserialized using the Builder.
DrgAttachmentTypeDrgRouteDistributionMatchCriteria	The attachment type from which the DRG will import routes.
DrgAttachmentTypeDrgRouteDistributionMatchCriteria.Builder
DrgRedundancyStatus	The redundancy status of the DRG.
DrgRedundancyStatus.Builder
DrgRouteDistribution	A route distribution establishes how routes get imported into DRG route tables and exported through the DRG attachments.
DrgRouteDistribution.Builder
DrgRouteDistributionMatchCriteria	The match criteria in a route distribution statement.
DrgRouteDistributionStatement	A single statement within a route distribution.
DrgRouteDistributionStatement.Builder
DrgRouteRule	A DRG route rule is a mapping between a destination IP address range and a DRG attachment.
DrgRouteRule.Builder
DrgRouteTable	All routing inside the DRG is driven by the contents of DRG route tables.
DrgRouteTable.Builder
DrgRoutingConfiguration	Identifies the DRG route table and rule that allowed the traffic to be forwarded.
DrgRoutingConfiguration.Builder
EgressSecurityListConfiguration	Defines the subnet egress security list configuration that allowed the traffic.
EgressSecurityListConfiguration.Builder
EgressSecurityRule	A rule for allowing outbound IP packets.
EgressSecurityRule.Builder
EgressTrafficSpec	Defines the traffic configuration that leaves the traffic node.
EgressTrafficSpec.Builder
EncryptionDomainConfig	Configuration information used by the encryption domain policy.
EncryptionDomainConfig.Builder
Endpoint	Information describing a source or destination in a PathAnalyzerTest resource.
FastConnectProviderService	A service offering from a supported provider.
FastConnectProviderService.Builder
FastConnectProviderServiceKey	A provider service key and its details.
FastConnectProviderServiceKey.Builder
FlowLogCaptureFilterRuleDetails	The set of rules governing what traffic the flow log collects when creating a flow log capture filter.
FlowLogCaptureFilterRuleDetails.Builder
ForwardedRoutingAction	Defines the routing actions taken for traffic that is forwarded.
ForwardedRoutingAction.Builder
ForwardedRoutingActionDetails	Defines details for the forwarded routing action.
ForwardedRoutingActionDetails.Builder
ForwardedRoutingConfiguration	Defines the type of the resource that forwarded traffic.
GetPathAnalysisDetails	Defines the configuration for getting a path analysis.
GetPublicIpByIpAddressDetails	IP address of the public IP.
GetPublicIpByIpAddressDetails.Builder
GetPublicIpByPrivateIpIdDetails	Details of the private IP that the public IP is assigned to.
GetPublicIpByPrivateIpIdDetails.Builder
IcmpOptions	Optional and valid only for ICMP and ICMPv6.
IcmpOptions.Builder
IcmpProtocolParameters	Defines the configuration for the ICMP protocol parameters.
IcmpProtocolParameters.Builder
IcmpTrafficProtocolParameters	Defines the ProtocolParameters configuration for the ICMP protocol.
IcmpTrafficProtocolParameters.Builder
IndeterminateRoutingAction	Defines the routing action taken on a traffic node where the routing action is INDETERMINATE.
IndeterminateRoutingAction.Builder
IngressSecurityListConfiguration	Defines the subnet ingress security list configuration that allowed the traffic.
IngressSecurityListConfiguration.Builder
IngressSecurityRule	A rule for allowing inbound IP packets.
IngressSecurityRule.Builder
InternetGateway	Represents a router that connects the edge of a VCN with the Internet.
InternetGateway.Builder
IpAddressEndpoint	Defines the details required for an IP_ADDRESS-type Endpoint.
IpAddressEndpoint.Builder
IPSecConnection	A connection between a DRG and CPE.
IPSecConnection.Builder
IPSecConnectionDeviceConfig	Deprecated.
IPSecConnectionDeviceConfig.Builder
IPSecConnectionDeviceStatus	Deprecated.
IPSecConnectionDeviceStatus.Builder
IPSecConnectionTunnel	Information about a single IPSec tunnel in an IPSec connection.
IPSecConnectionTunnel.Builder
IPSecConnectionTunnelErrorDetails	Details for an error on an IPSec tunnel.
IPSecConnectionTunnelErrorDetails.Builder
IPSecConnectionTunnelSharedSecret	The tunnel’s shared secret (pre-shared key).
IPSecConnectionTunnelSharedSecret.Builder
IpsecTunnelDrgAttachmentNetworkDetails	Specifies the IPSec tunnel attached to the DRG.
IpsecTunnelDrgAttachmentNetworkDetails.Builder
Ipv6	An IPv6 is a conceptual term that refers to an IPv6 address and related properties.
Ipv6.Builder
LetterOfAuthority	The Letter of Authority for the cross-connect.
LetterOfAuthority.Builder
LoadBalancerEndpoint	Defines the details required for a LOAD_BALANCER-type Endpoint.
LoadBalancerEndpoint.Builder
LoadBalancerListenerEndpoint	Defines the details required for a LOAD_BALANCER_LISTENER-type Endpoint.
LoadBalancerListenerEndpoint.Builder
LocalPeeringGateway	A local peering gateway (LPG) is an object on a VCN that lets that VCN peer with another VCN in the same region.
LocalPeeringGateway.Builder
LoopBackDrgAttachmentNetworkDetails	Specifies the loopback attachment on the DRG.
LoopBackDrgAttachmentNetworkDetails.Builder
MacsecKey	An object defining the Secrets-in-Vault OCIDs representing the MACsec key.
MacsecKey.Builder
MacsecProperties	Properties used for MACsec (if capable).
MacsecProperties.Builder
ModifyVcnCidrDetails	Details for updating a CIDR block.
ModifyVcnCidrDetails.Builder
NatGateway	A NAT (Network Address Translation) gateway, which represents a router that lets instances without public IPs contact the public internet without exposing the instance to inbound internet traffic.
NatGateway.Builder
NetworkingTopology	Defines the representation of a virtual network topology for a region.
NetworkingTopology.Builder
NetworkLoadBalancerEndpoint	Defines the details required for a NETWORK_LOAD_BALANCER-type Endpoint.
NetworkLoadBalancerEndpoint.Builder
NetworkLoadBalancerListenerEndpoint	Defines the details required for a NETWORK_LOAD_BALANCER_LISTENER-type Endpoint.
NetworkLoadBalancerListenerEndpoint.Builder
NetworkSecurityGroup	A network security group (NSG) provides virtual firewall rules for a specific set of Vnic in a VCN.
NetworkSecurityGroup.Builder
NetworkSecurityGroupVnic	Information about a VNIC that belongs to a network security group.
NetworkSecurityGroupVnic.Builder
NoRouteRoutingAction	Defines the routing actions taken on traffic when no route is found.
NoRouteRoutingAction.Builder
NoRouteRoutingActionDetails	Defines the routing action taken on traffic flow with no route found.
NoRouteRoutingActionDetails.Builder
NsgConfiguration	Defines the network security group configuration that allowed the traffic.
NsgConfiguration.Builder
OnPremEndpoint	Defines the details required for an ON_PREM-type Endpoint.
OnPremEndpoint.Builder
Path	Defines the configuration of the traffic path in PathAnalysisResult.
Path.Builder
PathAnalysisWorkRequestResult	Defines the configuration of the path analysis result.
PathAnalysisWorkRequestResult.Builder
PathAnalyzerTest	Defines the details saved in a PathAnalyzerTest resource.
PathAnalyzerTest.Builder
PathAnalyzerTestCollection	The results of a ListPathAnalyzerTests call in the current compartment.
PathAnalyzerTestCollection.Builder
PathAnalyzerTestSummary	Defines the summary of a PathAnalyzerTest resource.
PathAnalyzerTestSummary.Builder
PathTopology	Defines the representation of a virtual network topology for path analysis.
PathTopology.Builder
PersistedGetPathAnalysisDetails	Defines the configuration for getting a path analysis using the persisted PathAnalyzerTest resource.
PersistedGetPathAnalysisDetails.Builder
PhaseOneConfigDetails	Configuration details for IKE phase one (ISAKMP) configuration parameters.
PhaseOneConfigDetails.Builder
PhaseTwoConfigDetails	Configuration details for IPSec phase two configuration parameters.
PhaseTwoConfigDetails.Builder
PortRange	Note: Objects should always be created or deserialized using the PortRange.Builder.
PortRange.Builder
PrivateIp	A private IP is a conceptual term that refers to an IPv4 private IP address and related properties.
PrivateIp.Builder
ProtocolParameters	Defines the IP protocol parameters for a PathAnalyzerTest resource.
PublicIp	A public IP is a conceptual term that refers to a public IP address and related properties.
PublicIp.Builder
PublicIpPool	A public IP pool is a set of public IP addresses represented as one or more IPv4 CIDR blocks.
PublicIpPool.Builder
PublicIpPoolCollection	Results of a ListPublicIpPool operation.
PublicIpPoolCollection.Builder
PublicIpPoolSummary	Summary information about a public IP pool.
PublicIpPoolSummary.Builder
QueryOptions	Defines the query options required for a PathAnalyzerTest resource.
QueryOptions.Builder
RemotePeeringConnection	A remote peering connection (RPC) is an object on a DRG that lets the VCN that is attached to the DRG peer with a VCN in a different region.
RemotePeeringConnection.Builder
RemotePeeringConnectionDrgAttachmentNetworkDetails	Specifies the DRG attachment to another DRG.
RemotePeeringConnectionDrgAttachmentNetworkDetails.Builder
RemoveDrgRouteDistributionStatementsDetails	Details request to remove statements from a route distribution.
RemoveDrgRouteDistributionStatementsDetails.Builder
RemoveDrgRouteRulesDetails	Details used in a request to remove static routes from a DRG route table.
RemoveDrgRouteRulesDetails.Builder
RemoveNetworkSecurityGroupSecurityRulesDetails	Note: Objects should always be created or deserialized using the RemoveNetworkSecurityGroupSecurityRulesDetails.Builder.
RemoveNetworkSecurityGroupSecurityRulesDetails.Builder
RemovePublicIpPoolCapacityDetails	The information needed to remove capacity from a public IP pool.
RemovePublicIpPoolCapacityDetails.Builder
RemoveSubnetIpv6CidrDetails	Details object for removing an IPv6 CIDR Block from a Subnet.
RemoveSubnetIpv6CidrDetails.Builder
RemoveVcnCidrDetails	Details for removing a CIDR block from a VCN.
RemoveVcnCidrDetails.Builder
RemoveVcnIpv6CidrDetails	Details used when removing ULA or private IPv6 prefix or an IPv6 GUA assigned by Oracle or BYOIPv6 prefix.
RemoveVcnIpv6CidrDetails.Builder
RouteRule	A mapping between a destination IP address range and a virtual device to route matching packets to (a target).
RouteRule.Builder
RouteTable	A collection of RouteRule objects, which are used to route packets based on destination IP to a particular network entity.
RouteTable.Builder
RoutingAction	Defines the details for routing actions taken on the traffic flow.
SecurityAction	Defines the security action details taken on the traffic.
SecurityList	A set of virtual firewall rules for your VCN.
SecurityList.Builder
SecurityRule	A security rule is one of the items in a NetworkSecurityGroup.
SecurityRule.Builder
Service	An object that represents one or multiple Oracle services that you can enable for a ServiceGateway.
Service.Builder
ServiceGateway	Represents a router that lets your VCN privately access specific Oracle services such as Object Storage without exposing the VCN to the public internet.
ServiceGateway.Builder
ServiceIdRequestDetails	Note: Objects should always be created or deserialized using the ServiceIdRequestDetails.Builder.
ServiceIdRequestDetails.Builder
ServiceIdResponseDetails	Note: Objects should always be created or deserialized using the ServiceIdResponseDetails.Builder.
ServiceIdResponseDetails.Builder
StatefulEgressSecurityListConfiguration	Defines the stateful subnet egress security list configuration that allowed the ingress traffic.
StatefulEgressSecurityListConfiguration.Builder
StatefulIngressSecurityListConfiguration	Defines the stateful subnet ingress security list configuration that allowed the egress traffic.
StatefulIngressSecurityListConfiguration.Builder
StatefulNsgConfiguration	Defines the stateful network security group configuration that allowed the traffic.
StatefulNsgConfiguration.Builder
Subnet	A logical subdivision of a VCN.
Subnet.Builder
SubnetEndpoint	Defines the details required for a SUBNET-type Endpoint.
SubnetEndpoint.Builder
SubnetTopology	Defines the visualization of a subnet in a VCN.
SubnetTopology.Builder
TcpOptions	Optional and valid only for TCP.
TcpOptions.Builder
TcpProtocolParameters	Defines the configuration for TCP protocol parameters.
TcpProtocolParameters.Builder
TcpTrafficProtocolParameters	Defines the TrafficProtocolParameters configuration for the TCP protocol.
TcpTrafficProtocolParameters.Builder
Topology	Defines the representation of a virtual network topology.
TopologyAssociatedWithEntityRelationship	Defines the AssociatedWith relationship between virtual network topology entities.
TopologyAssociatedWithEntityRelationship.Builder
TopologyAssociatedWithRelationshipDetails	Defines association details for an associatedWith relationship.
TopologyAssociatedWithRelationshipDetails.Builder
TopologyContainsEntityRelationship	Defines the contains relationship between virtual network topology entities.
TopologyContainsEntityRelationship.Builder
TopologyEntityRelationship	Defines the relationship between Virtual Network topology entities.
TopologyRoutesToEntityRelationship	Defines the routesTo relationship between virtual network topology entities.
TopologyRoutesToEntityRelationship.Builder
TopologyRoutesToRelationshipDetails	Defines route rule details for a routesTo relationship.
TopologyRoutesToRelationshipDetails.Builder
TrafficNode	Defines the configuration of the OCI entity that represents a traffic node in PathAnalysisResult.
TrafficProtocolParameters	Defines the traffic protocol parameters for the traffic in a PathAnalysisResult.
TrafficRoute	Defines the traffic route taken in the path in PathAnalysisResult.
TrafficRoute.Builder
TunnelConfig	Deprecated.
TunnelConfig.Builder
TunnelCpeDeviceConfig	The set of CPE configuration answers for the tunnel, which the customer provides in updateTunnelCpeDeviceConfig.
TunnelCpeDeviceConfig.Builder
TunnelPhaseOneDetails	IPSec tunnel details specific to ISAKMP phase one.
TunnelPhaseOneDetails.Builder
TunnelPhaseTwoDetails	IPsec tunnel detail information specific to phase two.
TunnelPhaseTwoDetails.Builder
TunnelRouteSummary	A summary of the routes advertised to and received from the on-premises network.
TunnelRouteSummary.Builder
TunnelSecurityAssociationSummary	A summary of the IPSec tunnel security association details.
TunnelSecurityAssociationSummary.Builder
TunnelStatus	Deprecated.
TunnelStatus.Builder
UdpOptions	Optional and valid only for UDP.
UdpOptions.Builder
UdpProtocolParameters	Defines the configuration for UDP protocol parameters.
UdpProtocolParameters.Builder
UdpTrafficProtocolParameters	Defines the TrafficProtocolParameters configuration for the UDP protocol.
UdpTrafficProtocolParameters.Builder
UpdateByoipRangeDetails	The information used to update a ByoipRange resource.
UpdateByoipRangeDetails.Builder
UpdateCaptureFilterDetails	These details can be included in a request to update a capture filter.
UpdateCaptureFilterDetails.Builder
UpdateCpeDetails	Note: Objects should always be created or deserialized using the UpdateCpeDetails.Builder.
UpdateCpeDetails.Builder
UpdateCrossConnectDetails	Update a CrossConnect Note: Objects should always be created or deserialized using the UpdateCrossConnectDetails.Builder.
UpdateCrossConnectDetails.Builder
UpdateCrossConnectGroupDetails	Note: Objects should always be created or deserialized using the UpdateCrossConnectGroupDetails.Builder.
UpdateCrossConnectGroupDetails.Builder
UpdateDhcpDetails	Note: Objects should always be created or deserialized using the UpdateDhcpDetails.Builder.
UpdateDhcpDetails.Builder
UpdatedNetworkSecurityGroupSecurityRules	Note: Objects should always be created or deserialized using the UpdatedNetworkSecurityGroupSecurityRules.Builder.
UpdatedNetworkSecurityGroupSecurityRules.Builder
UpdateDrgAttachmentDetails	Note: Objects should always be created or deserialized using the UpdateDrgAttachmentDetails.Builder.
UpdateDrgAttachmentDetails.Builder
UpdateDrgDetails	Note: Objects should always be created or deserialized using the UpdateDrgDetails.Builder.
UpdateDrgDetails.Builder
UpdateDrgRouteDistributionDetails	Details used in a request to update a route distribution.
UpdateDrgRouteDistributionDetails.Builder
UpdateDrgRouteDistributionStatementDetails	Route distribution statements to update in the route distribution.
UpdateDrgRouteDistributionStatementDetails.Builder
UpdateDrgRouteDistributionStatementsDetails	Details request to update statements in a route distribution.
UpdateDrgRouteDistributionStatementsDetails.Builder
UpdateDrgRouteRuleDetails	Details used to update a route rule in the DRG route table.
UpdateDrgRouteRuleDetails.Builder
UpdateDrgRouteRulesDetails	Details used to update route rules in a DRG route table.
UpdateDrgRouteRulesDetails.Builder
UpdateDrgRouteTableDetails	Details used in a request to update a DRG route table.
UpdateDrgRouteTableDetails.Builder
UpdateInternetGatewayDetails	Note: Objects should always be created or deserialized using the UpdateInternetGatewayDetails.Builder.
UpdateInternetGatewayDetails.Builder
UpdateIPSecConnectionDetails	Note: Objects should always be created or deserialized using the UpdateIPSecConnectionDetails.Builder.
UpdateIPSecConnectionDetails.Builder
UpdateIPSecConnectionTunnelDetails	Note: Objects should always be created or deserialized using the UpdateIPSecConnectionTunnelDetails.Builder.
UpdateIPSecConnectionTunnelDetails.Builder
UpdateIPSecConnectionTunnelSharedSecretDetails	Note: Objects should always be created or deserialized using the UpdateIPSecConnectionTunnelSharedSecretDetails.Builder.
UpdateIPSecConnectionTunnelSharedSecretDetails.Builder
UpdateIPSecTunnelBgpSessionDetails	Note: Objects should always be created or deserialized using the UpdateIPSecTunnelBgpSessionDetails.Builder.
UpdateIPSecTunnelBgpSessionDetails.Builder
UpdateIPSecTunnelEncryptionDomainDetails	Request to update a multi-encryption domain policy on the IPSec tunnel.
UpdateIPSecTunnelEncryptionDomainDetails.Builder
UpdateIpv6Details	Note: Objects should always be created or deserialized using the UpdateIpv6Details.Builder.
UpdateIpv6Details.Builder
UpdateLocalPeeringGatewayDetails	Note: Objects should always be created or deserialized using the UpdateLocalPeeringGatewayDetails.Builder.
UpdateLocalPeeringGatewayDetails.Builder
UpdateMacsecKey	An object defining the OCID of the Secret held in Vault that represent the MACsec key.
UpdateMacsecKey.Builder
UpdateMacsecProperties	Properties used to update MACsec settings.
UpdateMacsecProperties.Builder
UpdateNatGatewayDetails	Note: Objects should always be created or deserialized using the UpdateNatGatewayDetails.Builder.
UpdateNatGatewayDetails.Builder
UpdateNetworkSecurityGroupDetails	Note: Objects should always be created or deserialized using the UpdateNetworkSecurityGroupDetails.Builder.
UpdateNetworkSecurityGroupDetails.Builder
UpdateNetworkSecurityGroupSecurityRulesDetails	Note: Objects should always be created or deserialized using the UpdateNetworkSecurityGroupSecurityRulesDetails.Builder.
UpdateNetworkSecurityGroupSecurityRulesDetails.Builder
UpdatePathAnalyzerTestDetails	Details to update a PathAnalyzerTest resource.
UpdatePathAnalyzerTestDetails.Builder
UpdatePrivateIpDetails	Note: Objects should always be created or deserialized using the UpdatePrivateIpDetails.Builder.
UpdatePrivateIpDetails.Builder
UpdatePublicIpDetails	Note: Objects should always be created or deserialized using the UpdatePublicIpDetails.Builder.
UpdatePublicIpDetails.Builder
UpdatePublicIpPoolDetails	The data to update for a public IP pool.
UpdatePublicIpPoolDetails.Builder
UpdateRemotePeeringConnectionDetails	Note: Objects should always be created or deserialized using the UpdateRemotePeeringConnectionDetails.Builder.
UpdateRemotePeeringConnectionDetails.Builder
UpdateRouteTableDetails	Note: Objects should always be created or deserialized using the UpdateRouteTableDetails.Builder.
UpdateRouteTableDetails.Builder
UpdateSecurityListDetails	Note: Objects should always be created or deserialized using the UpdateSecurityListDetails.Builder.
UpdateSecurityListDetails.Builder
UpdateSecurityRuleDetails	A rule for allowing inbound (direction= INGRESS) or outbound (direction= EGRESS) IP packets.
UpdateSecurityRuleDetails.Builder
UpdateServiceGatewayDetails	Note: Objects should always be created or deserialized using the UpdateServiceGatewayDetails.Builder.
UpdateServiceGatewayDetails.Builder
UpdateSubnetDetails	Note: Objects should always be created or deserialized using the UpdateSubnetDetails.Builder.
UpdateSubnetDetails.Builder
UpdateTunnelCpeDeviceConfigDetails	Note: Objects should always be created or deserialized using the UpdateTunnelCpeDeviceConfigDetails.Builder.
UpdateTunnelCpeDeviceConfigDetails.Builder
UpdateVcnDetails	Note: Objects should always be created or deserialized using the UpdateVcnDetails.Builder.
UpdateVcnDetails.Builder
UpdateVirtualCircuitDetails	Note: Objects should always be created or deserialized using the UpdateVirtualCircuitDetails.Builder.
UpdateVirtualCircuitDetails.Builder
UpdateVlanDetails	Note: Objects should always be created or deserialized using the UpdateVlanDetails.Builder.
UpdateVlanDetails.Builder
UpdateVnicDetails	Note: Objects should always be created or deserialized using the UpdateVnicDetails.Builder.
UpdateVnicDetails.Builder
UpdateVtapDetails	These details can be included in a request to update a virtual test access point (VTAP).
UpdateVtapDetails.Builder
UpgradeStatus	The upgrade status of a DRG.
UpgradeStatus.Builder
Vcn	A virtual cloud network (VCN).
Vcn.Builder
VcnDnsResolverAssociation	The information about the VCN and the DNS resolver in the association.
VcnDnsResolverAssociation.Builder
VcnDrgAttachmentNetworkCreateDetails	Specifies the VCN Attachment Note: Objects should always be created or deserialized using the VcnDrgAttachmentNetworkCreateDetails.Builder.
VcnDrgAttachmentNetworkCreateDetails.Builder
VcnDrgAttachmentNetworkDetails	Specifies details within the VCN.
VcnDrgAttachmentNetworkDetails.Builder
VcnDrgAttachmentNetworkUpdateDetails	Specifies the update details for the VCN attachment.
VcnDrgAttachmentNetworkUpdateDetails.Builder
VcnRoutingConfiguration	Identifies the VCN route table and rule that allowed the traffic to be forwarded.
VcnRoutingConfiguration.Builder
VcnTopology	Defines the representation of a virtual network topology for a VCN.
VcnTopology.Builder
VirtualCircuit	For use with Oracle Cloud Infrastructure FastConnect.
VirtualCircuit.Builder
VirtualCircuitAssociatedTunnelDetails	Detailed private tunnel info associated with the virtual circuit.
VirtualCircuitAssociatedTunnelDetails.Builder
VirtualCircuitBandwidthShape	An individual bandwidth level for virtual circuits.
VirtualCircuitBandwidthShape.Builder
VirtualCircuitDrgAttachmentNetworkDetails	Specifies the virtual circuit attached to the DRG.
VirtualCircuitDrgAttachmentNetworkDetails.Builder
VirtualCircuitPublicPrefix	A public IP prefix and its details.
VirtualCircuitPublicPrefix.Builder
VisibleTrafficNode	Defines the configuration of a traffic node that is visible to the user.
VisibleTrafficNode.Builder
Vlan	A resource to be used only with the Oracle Cloud VMware Solution.
Vlan.Builder
VlanEndpoint	Defines the details required for a VLAN-type Endpoint.
VlanEndpoint.Builder
Vnic	A virtual network interface card.
Vnic.Builder
VnicEndpoint	Defines the details required for a VNIC-type Endpoint.
VnicEndpoint.Builder
Vtap	A virtual test access point (VTAP) provides a way to mirror all traffic from a designated source to a selected target in order to facilitate troubleshooting, security analysis, and data monitoring.
Vtap.Builder
VtapCaptureFilterRuleDetails	This resource contains the rules governing what traffic a VTAP mirrors.
VtapCaptureFilterRuleDetails.Builder
WorkRequest	An asynchronous work request.
WorkRequest.Builder
WorkRequestError	An error encountered while executing an operation that is tracked by a work request.
WorkRequestError.Builder
WorkRequestErrorCollection	Results of a WorkRequestError search.
WorkRequestErrorCollection.Builder
WorkRequestLogEntry	A log message from executing an operation that is tracked by a work request.
WorkRequestLogEntry.Builder
WorkRequestLogEntryCollection	Results of a WorkRequestLog search.
WorkRequestLogEntryCollection.Builder
WorkRequestResource	A resource created or operated on by a work request.
WorkRequestResource.Builder
WorkRequestResult	Ephemeral data resulting from an asynchronous operation.
WorkRequestResultCollection	Results of a WorkRequestResult search.
WorkRequestResultCollection.Builder
WorkRequestSummary	A summary of the status of a work request.
WorkRequestSummary.Builder
WorkRequestSummaryCollection	Results of a WorkRequest search.
WorkRequestSummaryCollection.Builder

Enum Summary

Enum	Description
ActionType	Possible types of actions.
AddDrgRouteDistributionStatementDetails.Action	Accept: import/export the route “as is”
AddDrgRouteRuleDetails.DestinationType	Type of destination for the rule.
AddSecurityRuleDetails.DestinationType	Type of destination for the rule.
AddSecurityRuleDetails.Direction	Direction of the security rule.
AddSecurityRuleDetails.SourceType	Type of source for the rule.
AllowedSecurityConfiguration.Type	The type of the allowed security configuration.
BgpSessionInfo.BgpIpv6State	The state of the BGP IPv6 session.
BgpSessionInfo.BgpState	The state of the BGP session.
ByoipRange.LifecycleDetails	The ByoipRange resource’s current status.
ByoipRange.LifecycleState	The ByoipRange resource’s current state.
CaptureFilter.FilterType	Indicates which service will use this capture filter
CaptureFilter.LifecycleState	The capture filter’s current administrative state.
CreateCaptureFilterDetails.FilterType	Indicates which service will use this capture filter
CreateDhcpDetails.DomainNameType	The search domain name type of DHCP options
CreateDrgRouteDistributionDetails.DistributionType	Whether this distribution defines how routes get imported into route tables or exported through DRG Attachments
CreateIPSecConnectionDetails.CpeLocalIdentifierType	The type of identifier for your CPE device.
CreateIPSecConnectionTunnelDetails.IkeVersion	Internet Key Exchange protocol version.
CreateIPSecConnectionTunnelDetails.NatTranslationEnabled	By default (the AUTO setting), IKE sends packets with a source and destination port set to 500, and when it detects that the port used to forward packets has changed (most likely because a NAT device is between the CPE device and the Oracle VPN headend) it will try to negotiate the use of NAT-T.
CreateIPSecConnectionTunnelDetails.OracleInitiation	Indicates whether the Oracle end of the IPSec connection is able to initiate starting up the IPSec tunnel.
CreateIPSecConnectionTunnelDetails.Routing	The type of routing to use for this tunnel (BGP dynamic routing, static routing, or policy-based routing).
CreatePublicIpDetails.Lifetime	Defines when the public IP is deleted and released back to the Oracle Cloud Infrastructure public IP pool.
CreateVirtualCircuitDetails.BgpAdminState	Set to ENABLED (the default) to activate the BGP session of the virtual circuit, set to DISABLED to deactivate the virtual circuit.
CreateVirtualCircuitDetails.RoutingPolicy
CreateVirtualCircuitDetails.Type	The type of IP addresses used in this virtual circuit.
CreateVtapDetails.EncapsulationProtocol	Defines an encapsulation header type for the VTAP’s mirrored traffic.
CreateVtapDetails.SourceType	The source type for the VTAP.
CreateVtapDetails.TargetType	The target type for the VTAP.
CreateVtapDetails.TrafficMode	Used to control the priority of traffic.
CrossConnect.LifecycleState	The cross-connect’s current state.
CrossConnectGroup.LifecycleState	The cross-connect group’s current state.
CrossConnectMappingDetails.Ipv4BgpStatus	The state of the Ipv4 BGP session.
CrossConnectMappingDetails.Ipv6BgpStatus	The state of the Ipv6 BGP session.
CrossConnectStatus.EncryptionStatus	Encryption status of this cross connect.
CrossConnectStatus.InterfaceState	Indicates whether Oracle’s side of the interface is up or down.
CrossConnectStatus.LightLevelIndicator	Status indicator corresponding to the light level.
DhcpDnsOption.ServerType	VcnLocal: Reserved for future use.
DhcpOptions.DomainNameType	The search domain name type of DHCP options
DhcpOptions.LifecycleState	The current state of the set of DHCP options.
DpdConfig.DpdMode	This option defines whether DPD can be initiated from the Oracle side of the connection.
Drg.LifecycleState	The DRG’s current state.
DrgAttachment.LifecycleState	The DRG attachment’s current state.
DrgAttachmentNetworkCreateDetails.Type
DrgAttachmentNetworkDetails.Type
DrgAttachmentNetworkUpdateDetails.Type
DrgAttachmentTypeDrgRouteDistributionMatchCriteria.AttachmentType	The type of the network resource to be included in this match.
DrgRedundancyStatus.Status	The redundancy status of the DRG.
DrgRouteDistribution.DistributionType	Whether this distribution defines how routes get imported into route tables or exported through DRG attachments.
DrgRouteDistribution.LifecycleState	The route distribution’s current state.
DrgRouteDistributionMatchCriteria.MatchType	The type of the match criteria for a route distribution statement.
DrgRouteDistributionStatement.Action	ACCEPT indicates the route should be imported or exported as-is.
DrgRouteRule.DestinationType	The type of destination for the rule.
DrgRouteRule.RouteProvenance	The earliest origin of a route.
DrgRouteRule.RouteType	You can specify static routes for the DRG route table using the API.
DrgRouteTable.LifecycleState	The DRG route table’s current state.
EgressSecurityRule.DestinationType	Type of destination for the rule.
Endpoint.Type	The type of the Endpoint.
FastConnectProviderService.BandwithShapeManagement	Who is responsible for managing the virtual circuit bandwidth.
FastConnectProviderService.CustomerAsnManagement	Who is responsible for managing the ASN information for the network at the other end of the connection from Oracle.
FastConnectProviderService.PrivatePeeringBgpManagement	Who is responsible for managing the private peering BGP information.
FastConnectProviderService.ProviderServiceKeyManagement	Who is responsible for managing the provider service key.
FastConnectProviderService.PublicPeeringBgpManagement	Who is responsible for managing the public peering BGP information.
FastConnectProviderService.SupportedVirtualCircuitTypes
FastConnectProviderService.Type	Provider service type.
FlowLogCaptureFilterRuleDetails.FlowLogType	Type or types of flow logs to store.
FlowLogCaptureFilterRuleDetails.RuleAction	Include or exclude a ruleAction object.
ForwardedRoutingConfiguration.Type	Type of the forwarded routing configuration.
GetPathAnalysisDetails.Type	The type of the PathAnalysis query.
IngressSecurityRule.SourceType	Type of source for the rule.
InternetGateway.LifecycleState	The internet gateway’s current state.
IPSecConnection.CpeLocalIdentifierType	The type of identifier for your CPE device.
IPSecConnection.LifecycleState	The IPSec connection’s current state.
IPSecConnection.TransportType	The transport type used for the IPSec connection.
IPSecConnectionTunnel.DpdMode	Dead peer detection (DPD) mode set on the Oracle side of the connection.
IPSecConnectionTunnel.IkeVersion	Internet Key Exchange protocol version.
IPSecConnectionTunnel.LifecycleState	The tunnel’s lifecycle state.
IPSecConnectionTunnel.NatTranslationEnabled	By default (the AUTO setting), IKE sends packets with a source and destination port set to 500, and when it detects that the port used to forward packets has changed (most likely because a NAT device is between the CPE device and the Oracle VPN headend) it will try to negotiate the use of NAT-T.
IPSecConnectionTunnel.OracleCanInitiate	Indicates whether Oracle can only respond to a request to start an IPSec tunnel from the CPE device, or both respond to and initiate requests.
IPSecConnectionTunnel.Routing	The type of routing used for this tunnel (BGP dynamic routing, static routing, or policy-based routing).
IPSecConnectionTunnel.Status	The status of the tunnel based on IPSec protocol characteristics.
Ipv6.LifecycleState	The IPv6’s current state.
LetterOfAuthority.CircuitType	The type of cross-connect fiber, termination, and optical specification.
LocalPeeringGateway.LifecycleState	The LPG’s current lifecycle state.
LocalPeeringGateway.PeeringStatus	Whether the LPG is peered with another LPG.
MacsecEncryptionCipher	Type of encryption cipher suite to use for the MACsec connection.
MacsecState	Indicates whether or not MACsec is enabled.
NatGateway.LifecycleState	The NAT gateway’s current state.
NetworkSecurityGroup.LifecycleState	The network security group’s current state.
OperationStatus	Possible operation status.
OperationType	Possible operation types.
PathAnalyzerTest.LifecycleState	The current state of the PathAnalyzerTest resource.
PhaseOneConfigDetails.AuthenticationAlgorithm	The custom authentication algorithm proposed during phase one tunnel negotiation.
PhaseOneConfigDetails.DiffieHelmanGroup	The custom Diffie-Hellman group proposed during phase one tunnel negotiation.
PhaseOneConfigDetails.EncryptionAlgorithm	The custom encryption algorithm proposed during phase one tunnel negotiation.
PhaseTwoConfigDetails.AuthenticationAlgorithm	The authentication algorithm proposed during phase two tunnel negotiation.
PhaseTwoConfigDetails.EncryptionAlgorithm	The encryption algorithm proposed during phase two tunnel negotiation.
PhaseTwoConfigDetails.PfsDhGroup	The Diffie-Hellman group used for PFS, if PFS is enabled.
ProtocolParameters.Type	The type of the ProtocolParameters object.
PublicIp.AssignedEntityType	The type of entity the public IP is assigned to, or in the process of being assigned to.
PublicIp.LifecycleState	The public IP’s current state.
PublicIp.Lifetime	Defines when the public IP is deleted and released back to Oracle’s public IP pool.
PublicIp.Scope	Whether the public IP is regional or specific to a particular availability domain.
PublicIpPool.LifecycleState	The public IP pool’s current state.
RemotePeeringConnection.LifecycleState	The RPC’s current lifecycle state.
RemotePeeringConnection.PeeringStatus	Whether the RPC is peered with another RPC.
RouteRule.DestinationType	Type of destination for the rule.
RouteRule.RouteType	A route rule can be STATIC if manually added to the route table, LOCAL if added by OCI to the route table.
RouteTable.LifecycleState	The route table’s current state.
RoutingAction.Action	The routing action taken on the traffic flow.
RoutingAction.ActionType	The type of the routing support for the traffic flow.
SecurityAction.Action	Action taken on the traffic.
SecurityAction.ActionType	Type of the SecurityAction.
SecurityList.LifecycleState	The security list’s current state.
SecurityRule.DestinationType	Type of destination for the rule.
SecurityRule.Direction	Direction of the security rule.
SecurityRule.SourceType	Type of source for the rule.
ServiceGateway.LifecycleState	The service gateway’s current state.
SortOrder	Allowed sort orders, either ‘ASC’ for ascending or ‘DESC’ for descending.
Subnet.LifecycleState	The subnet’s current state.
Topology.Type	Type of the topology object.
TopologyEntityRelationship.Type	The type of relationship between the entities.
TopologyRoutesToRelationshipDetails.RouteType	A route rule can be STATIC if manually added to the route table or DYNAMIC if imported from another route table.
TrafficNode.Type	Type of the TrafficNode.
TrafficProtocolParameters.Type	Type of the TrafficProtocolParameters object.
TrafficRoute.ReachabilityStatus	Reachability status for the given traffic route.
TunnelRouteSummary.Advertiser	The source of the route advertisement.
TunnelSecurityAssociationSummary.TunnelSaStatus	The IPSec tunnel’s phase one status.
TunnelStatus.LifecycleState	The tunnel’s current state.
UpdateDhcpDetails.DomainNameType	The search domain name type of DHCP options
UpdateDrgRouteRuleDetails.DestinationType	Type of destination for the rule.
UpdateIPSecConnectionDetails.CpeLocalIdentifierType	The type of identifier for your CPE device.
UpdateIPSecConnectionTunnelDetails.IkeVersion	Internet Key Exchange protocol version.
UpdateIPSecConnectionTunnelDetails.NatTranslationEnabled	By default (the AUTO setting), IKE sends packets with a source and destination port set to 500, and when it detects that the port used to forward packets has changed (most likely because a NAT device is between the CPE device and the Oracle VPN headend) it will try to negotiate the use of NAT-T.
UpdateIPSecConnectionTunnelDetails.OracleInitiation	Indicates whether the Oracle end of the IPSec connection is able to initiate starting up the IPSec tunnel.
UpdateIPSecConnectionTunnelDetails.Routing	The type of routing to use for this tunnel (BGP dynamic routing, static routing, or policy-based routing).
UpdateSecurityRuleDetails.DestinationType	Type of destination for the rule.
UpdateSecurityRuleDetails.Direction	Direction of the security rule.
UpdateSecurityRuleDetails.SourceType	Type of source for the rule.
UpdateVirtualCircuitDetails.BgpAdminState	Set to ENABLED (the default) to activate the BGP session of the virtual circuit, set to DISABLED to deactivate the virtual circuit.
UpdateVirtualCircuitDetails.ProviderState	The provider’s state in relation to this virtual circuit.
UpdateVirtualCircuitDetails.RoutingPolicy
UpdateVtapDetails.EncapsulationProtocol	Defines an encapsulation header type for the VTAP’s mirrored traffic.
UpdateVtapDetails.SourceType	The source type for the VTAP.
UpdateVtapDetails.TargetType	The target type for the VTAP.
UpdateVtapDetails.TrafficMode	Used to control the priority of traffic.
UpgradeStatus.Status	The current upgrade status of the DRG attachment.
Vcn.LifecycleState	The VCN’s current state.
VcnDnsResolverAssociation.LifecycleState	The current state of the association.
VcnDrgAttachmentNetworkDetails.VcnRouteType	Indicates whether the VCN CIDRs or the individual subnet CIDRs are imported from the attachment.
VirtualCircuit.BgpAdminState	Set to ENABLED (the default) to activate the BGP session of the virtual circuit, set to DISABLED to deactivate the virtual circuit.
VirtualCircuit.BgpIpv6SessionState	The state of the Ipv6 BGP session associated with the virtual circuit.
VirtualCircuit.BgpManagement	Deprecated.
VirtualCircuit.BgpSessionState	The state of the Ipv4 BGP session associated with the virtual circuit.
VirtualCircuit.LifecycleState	The virtual circuit’s current state.
VirtualCircuit.ProviderState	The provider’s state in relation to this virtual circuit (if the customer is connecting via a provider).
VirtualCircuit.RoutingPolicy
VirtualCircuit.ServiceType	Provider service type.
VirtualCircuit.Type	Whether the virtual circuit supports private or public peering.
VirtualCircuitAssociatedTunnelDetails.TunnelType	The type of the tunnel associated with the virtual circuit.
VirtualCircuitIpMtu	The layer 3 IP MTU to use with this virtual circuit.
VirtualCircuitPublicPrefix.VerificationState	Oracle must verify that the customer owns the public IP prefix before traffic for that prefix can flow across the virtual circuit.
Vlan.LifecycleState	The VLAN’s current state.
Vnic.LifecycleState	The current state of the VNIC.
Vtap.EncapsulationProtocol	Defines an encapsulation header type for the VTAP’s mirrored traffic.
Vtap.LifecycleState	The VTAP’s administrative lifecycle state.
Vtap.LifecycleStateDetails	The VTAP’s current running state.
Vtap.SourceType	The source type for the VTAP.
Vtap.TargetType	The target type for the VTAP.
Vtap.TrafficMode	Used to control the priority of traffic.
VtapCaptureFilterRuleDetails.RuleAction	Include or exclude packets meeting this definition from mirrored traffic.
VtapCaptureFilterRuleDetails.TrafficDirection	The traffic direction the VTAP is configured to mirror.
WorkRequestResult.ResultType	Type of WorkRequestResult.