Attaching a DRG to a VCN in a Different Tenancy

• Console
• CLI
• API

• 1. Open the navigation menu  and select Networking. Under Customer connectivity, select Dynamic routing gateway.
  2. Under List Scope, select a compartment that you have permission to work in.The page updates to display only the resources in that compartment. If you're not sure which compartment to use, contact an administrator. For more information, see Access Control.
  3. Click the name of the DRG you want to attach to a VCN in another tenancy.
  4. Under Resources, click Cross-tenancy attachments.
  5. Click Cross-tenancy attachment and enter the following information:
     • (Optional) Give the attachment point a friendly name. If you don't specify a name, one is created for you.
     • Enter the OCID of the desired VCN.
  6. (Optional) If you're setting up an advanced scenario for transit routing, you can associate a VCN route table with the DRG attachment (you can do this later):
     1. Click Show Advanced Options.
     2. Click the VCN route table tab.
     3. Select the route table that you want to associate with the VCN attachment on the DRG. If you select None, the default VCN route table is used.
     4. (Optional) If you are planning to use transit routing and need to associate a specific DRG route table to the attachment, switch to the DRG route table tab and choose an existing DRG route table. See Creating a DRG Route Table.
     5. (Optional) If you need to specify that you want to import VCN CIDRs into a DRG route table from the VCN attachment, switch to the VCN Route type tab and choose VCN CIDRs.
        If you don't explicitly choose VCN CIDRs, Subnet CIDRs is chosen for you and the subnet CIDRs are imported into a DRG route table from the VCN attachment. Routes from the VCN ingress route table are always imported.
  7. When you are finished, click Create cross-tenancy attachment.

• Use the network drg-attachment create command and required parameters to attach a VCN in another tenancy to a DRG:

  Command

  CopyTry It

  oci network drg-attachment create --drg-id drg-ocid --network-details [complex type] ...[OPTIONS]

  For a complete list of parameters and values for CLI commands, see the CLI Command Reference.

• Run the CreateDrgAttachment operation to create a DRG attachment to a VCN in another tenancy.