Package com.oracle.bmc.networkloadbalancer.model

Class CreateNetworkLoadBalancerDetails.Builder

    • Constructor Detail

      • Builder

        public Builder()

    • Method Detail

      • isPreserveSourceDestination

        public CreateNetworkLoadBalancerDetails.Builder isPreserveSourceDestination​(Boolean isPreserveSourceDestination)
        This parameter can be enabled only if backends are compute OCIDs.

        When enabled, the skipSourceDestinationCheck parameter is automatically enabled on the load balancer VNIC, and packets are sent to the backend with the entire IP header intact.

        Parameters:
        isPreserveSourceDestination - the value to set
        Returns:
        this builder

      • isSymmetricHashEnabled

        public CreateNetworkLoadBalancerDetails.Builder isSymmetricHashEnabled​(Boolean isSymmetricHashEnabled)
        This can only be enabled when NLB is working in transparent mode with source destination header preservation enabled.

        This removes the additional dependency from NLB backends(like Firewalls) to perform SNAT.

        Parameters:
        isSymmetricHashEnabled - the value to set
        Returns:
        this builder

      • isPrivate

        public CreateNetworkLoadBalancerDetails.Builder isPrivate​(Boolean isPrivate)
        Whether the network load balancer has a virtual cloud network-local (private) IP address.

        If "true", then the service assigns a private IP address to the network load balancer.

        If "false", then the service assigns a public IP address to the network load balancer.

        A public network load balancer is accessible from the internet, depending on the [security list rules](https://docs.oracle.com/iaas/Content/network/Concepts/securitylists.htm) for your virtual cloud network. For more information about public and private network load balancers, see [Network Load Balancer Types](https://docs.oracle.com/iaas/Content/NetworkLoadBalancer/introduction.htm#NetworkLoadBalancerTypes). This value is true by default.

        Example: true

        Parameters:
        isPrivate - the value to set
        Returns:
        this builder

      • networkSecurityGroupIds

        public CreateNetworkLoadBalancerDetails.Builder networkSecurityGroupIds​(List<String> networkSecurityGroupIds)
        An array of network security groups OCIDs associated with the network load balancer.

        During the creation of the network load balancer, the service adds the new load balancer to the specified network security groups.

        The benefits of associating the network load balancer with network security groups include:

        Network security groups define network security rules to govern ingress and egress traffic for the network load balancer.

        The network security rules of other resources can reference the network security groups associated with the network load balancer to ensure access.

        Example: ["ocid1.nsg.oc1.phx.unique_ID"]

        Parameters:
        networkSecurityGroupIds - the value to set
        Returns:
        this builder

      • subnetIpv6Cidr

        public CreateNetworkLoadBalancerDetails.Builder subnetIpv6Cidr​(String subnetIpv6Cidr)
        IPv6 subnet prefix selection.

        If Ipv6 subnet prefix is passed, Nlb Ipv6 Address would be assign within the cidr block. NLB has to be dual or single stack ipv6 to support this.

        Parameters:
        subnetIpv6Cidr - the value to set
        Returns:
        this builder

      • assignedPrivateIpv4

        public CreateNetworkLoadBalancerDetails.Builder assignedPrivateIpv4​(String assignedPrivateIpv4)
        Private IP address to be assigned to the network load balancer being created.

        This IP address has to be in the CIDR range of the subnet where network load balancer is being created Example: “10.0.0.1”

        Parameters:
        assignedPrivateIpv4 - the value to set
        Returns:
        this builder

      • assignedIpv6

        public CreateNetworkLoadBalancerDetails.Builder assignedIpv6​(String assignedIpv6)
        IPv6 address to be assigned to the network load balancer being created.

        This IP address has to be part of one of the prefixes supported by the subnet. Example: “2607:9b80:9a0a:9a7e:abcd:ef01:2345:6789”

        Parameters:
        assignedIpv6 - the value to set
        Returns:
        this builder

      • freeformTags

        public CreateNetworkLoadBalancerDetails.Builder freeformTags​(Map<String,​String> freeformTags)
        Simple key-value pair that is applied without any predefined name, type, or scope.

        Exists for cross-compatibility only. Example: {“bar-key”: “value”}

        Parameters:
        freeformTags - the value to set
        Returns:
        this builder

      • definedTags

        public CreateNetworkLoadBalancerDetails.Builder definedTags​(Map<String,​Map<String,​Object>> definedTags)
        Defined tags for this resource.

        Each key is predefined and scoped to a namespace. Example: {“foo-namespace”: {“bar-key”: “value”}}

        Parameters:
        definedTags - the value to set
        Returns:
        this builder

      • securityAttributes

        public CreateNetworkLoadBalancerDetails.Builder securityAttributes​(Map<String,​Map<String,​Object>> securityAttributes)
        ZPR tags for this resource.

        Each tag is a simple key-value pair with no predefined name, type, or namespace. For more information, see Resource Tags.

        Example: {"oracle-zpr": {"td": {"value": "42", "mode": "audit"}}}

        Parameters:
        securityAttributes - the value to set
        Returns:
        this builder