Creating a Diagnostic Command for a Roving Edge Infrastructure Device

Describes how to create a diagnostic command for a Roving Edge Infrastructure device.

Begin by recording the OCID of the attached VNIC. After you record that OCID, you can continue on to create the diagnostic command.

Using the Device Console

Open the navigation menu and select Compute > Instances. The Instances page appears. All instances are listed in tabular form.
Click the instance that has the attached VNIC whose OCID you want to get. The instance's Details page appears.
Click Attached VNICs under Resources. The Attached VNICs page appears. All attached VNICs are listed in tabular form. The primary VNIC is indicated by the Primary VNIC label next to it.
Click the attached primary VNIC whose OCID you want to get. The VNIC's Details page appears.
The VNIC's OCID appears under VNIC Information. Click Copy to copy the OCID and subsequently paste it in the VNIC OCID box in the Create Diagnostic Command dialog box.
Open the navigation menu and select Node Management > Diagnostic Commands. The Diagnostic Commands page appears. All diagnostic commands are listed in tabular form.
Click Create Command. The Create Diagnostic Command dialog box appears.
Enter a Name for the diagnostic command.
Select the Command Type from the list.

Note

Currently, only VNIC Packet Capture is available as a command type.
Enter the VNIC OCID.
Select the Packet Length in bytes from the list.
Select the Capture Duration in seconds from the list.
Click Create Command.

The diagnostic command you created appears in the list in the Diagnostic Commands page.